Chang Hong Mining Machinery Co., Ltd.
Chang Hong Mining Machinery Co., Ltd.
Add to Cart
Carbon Steel 304 SS Z Type Bucket Conveyor Heat Resistant For Chemical Industrial
The bucket elevator is used to load materials into the bucket and transport them vertically upward to the target equipment, which has the characteristics of large conveying capacity and high lifting height. The equipment is made of stainless steel and food grade plastic polypropylene (ABS). It automatically starts and stops feeding under the control of sensors and circuits.
Continuous bucket elevators are used to handle powders, bulk solids or friable ,fragile materials because they minimize product damage or are used to handle light fluffy materials where aeration of the product must be avoided. Continuous bucket elevators have buckets spaced continuously and operate at slower speeds. The continuous bucket placement allows the force of gravity to discharge their load onto the inverted front of the proceeding bucket. The bucket then guides that material into the discharge throat on the descending side of the elevator.
Because every bucket application is unique,we offers a broad series of industrial elevator designs like Z type bucket elevator, C type bucket elevator etc. Selection of the proper type of bucket elevator depends largely on the capacity requirements and the characteristics of the material to be handled; which are depend upon customer's requirement too.
Advantages
· Easy installation and operate
· Energy saving
· The material is zero broken
· Heavy duty motor mount
· Adjustable chain
· Multipoint feeding and multipoiint unloading
· no raise dust,no leak
· Smooth running&quiet
| Sizing Table | ||||||||||
| CHZD-3 | CHZD-6 | CHZD-10 | CHZD-15 | CHZD-20 | CHZD-25 | CHZD-30 | CHZD-35 | |||
| Transmit Mass | 100% | m3/h | 6 | 15 | 22 | 30 | 45 | 56 | 68 | 80 |
| 75% | 4.5 | 11 | 16.5 | 22.5 | 33.5 | 42 | 51 | 60 | ||
| Bucket | Volume | L | 3 | 6 | 10 | 15 | 20 | 25 | 30 | 35 |
| Width | mm | 370 | 470 | 870 | 500 | 560 | 690 | 815 | 940 | |
| Distance | mm | 228.6 | 330 | |||||||
| Chain | QTY | -- | 2 | |||||||
| Pitch | mm | 38.1 | 66 | |||||||
| Single chain break loading(KN) minimum | 37.6 | 90 | ||||||||
| Chain Wheel | Teeth QTY | -- | 26 | 22 | ||||||
| Pitch cercle diameter | mm | 316.09 | 463.76 | |||||||
| Bucket running speed | m/s | ≤0.3 | ≤0.25 | |||||||
| Transmission shaft revolution | r/min | ≤0.3 | ||||||||
| Max elevating height | m | ≤45 | ||||||||
| Max horizontal transport distance | m | ≤100 | ||||||||
| Total Power | KW | 0.75-22 | 1.1-22 | 2.2-22 | 5.5-22 | 5.5-30 | ||||
| Bucket Specification Size | |||||||
| Item | Width(mm) | Volume(L) | Size | CH3-10 Drawing | |||
| a | h | d(H12) | j | ||||
| CH3 | 370 | 3 | 235 | 120 | Φ13 | 20 | |
| CH6 | 470 | 6 | |||||
| CH10 | 870 | 10 | |||||
| CH15-35 Drawing | |||||||
| CH15 | 500 | 15 | 340 | 195 | Φ12 | 45 | |
| CH20 | 560 | 20 | |||||
| CH25 | 690 | 25 | |||||
| CH30 | 815 | 30 | |||||
| CH35 | 940 | 35 | |||||
Can be used in any form (according to customer requirements)
Free design for customers